BANARTA
High-compression XPS board enquiries
Discuss custom XPS foam board supply with a requested compressive strength of up to 1000 kPa. Specify the grade, dimensions and application when enquiring so the proposed board can be checked against your project requirements.
Options listed for this range include different thicknesses, colours and surface finishes, plus cutting and lamination for further fabrication. Confirm which options are available for the requested strength grade before ordering.
Published range specifications
The table below lists the original range information, not a confirmed specification for every 1000 kPa configuration. Request the current grade-specific datasheet and test report, including test method and conditions. Confirm the temperature range and applicable fire classification rather than relying on the abbreviated table labels.
Features |
Specification |
Length | 1000mm-3000mm |
Width | 600mm / 1200mm |
Thickness | 6mm-120mm |
Color | Yellow/Blue/White / Pink |
Thermal conductivity | 0.030W/ M.K |
Compressive Strength | 150-1000kpa |
Surface | Without Skin / Skin / Grooved |
Fire Rating | B1/B2/B3 |
Working Temperature | -30℃-80℃ |
Specify your project requirements
- Required compressive-strength grade and supporting test documentation.
- Board length, width, thickness, surface finish and cutting tolerances.
- Intended assembly, load requirements and any lamination or facing materials.
- Quantity, packaging and delivery destination.
For floor, cold-storage, composite-panel or civil-engineering enquiries, provide the project specification for review. Application suitability and design acceptance must be confirmed for the selected product and complete assembly.