Banarta

CHINA-BASED B2B SUPPLIER

XPS Tile Backer Boards Supplier in China

XPS tile backer boards combine an insulating foam core with reinforced cement-based faces. Compare our double-sided cement-coated board in 6–50 mm finished thickness with grooved boards for water-pipe heating. Banarta supplies wholesale and project orders from China.

COMPARE YOUR STARTING POINT

Choose your coated XPS board configuration

Select the board construction before the thickness. Neither option alone establishes a complete waterproof tiled assembly; joints, fixings, support and the floor or wall finish still need approval.

SPECIFICATION TO PRODUCTION

Board construction
Start with flat, double-sided coated boards for tile backing, or a routed coated board for the specified heating layout. Keep these configurations on separate enquiry lines.
From specification to sample
Send finished dimensions, support arrangement and the required coating or groove details. Discuss a reference sample and matching fixing and sealing information with Banarta.
Sample, packing and delivery details

Ask the offer to confirm pieces per pack and pallet, packed dimensions, gross weight, edge protection and model/size labels.

Share the information you have; mark undecided details for review. Sample terms, minimum quantities, pricing and lead time are confirmed for the selected configuration in the offer.

Discuss specifications & samples →

Showing all 13 results

Board handling and processing equipment
Board handling and processing detail. Confirm the coating, finished thickness and sample requirements for the selected board.

FROM MATERIAL TO YOUR SPECIFICATION

Bring your drawing. Discuss the details.

Work with Banarta on the product construction, dimensions, sample requirements and supply details for your application.

  1. Share your application, dimensions or drawing.
  2. Review the proposed configuration and sample requirements.
  3. Confirm the selected specification, packing and delivery terms in the offer.
Discuss your specification →

SELECTION GUIDE

Choosing your material

XPS tile backer boards combine an insulating foam core with reinforced cement-based faces. Compare our double-sided cement-coated board in 6–50 mm finished thickness with grooved boards for water-pipe heating. Banarta supplies wholesale and project orders from China.

Choose a board for your product range or project

Board formatPurchase specification
Double-sided cement-coated XPS tile backer boardSupply reference 1601582350137: XPS core with fiberglass mesh reinforced cement coating on both faces. Finished-board thickness: 6–50 mm, including the coatings. Listed options include 6, 10, 12, 20, 30, 40 and 50 mm. State the required length, width and quantity; confirm the selected configuration in your quotation. View this board construction and thickness reference.
Grooved XPS tile backer boardPublished options: 1200 × 600 mm, 20–50 mm total thickness and grooves for 16 mm or 20 mm pipe. Confirm the selected diameter, groove drawing and complete floor build-up.

The 6–50 mm range above applies to the linked flat-board supply reference, not automatically to every item in this category or to the bare XPS core. Board length, width, finish and packing are quoted for your order. If you need a custom size or thickness, include it in your enquiry for confirmation.

For room-by-room project quantities, review the bathroom XPS backer board and specify the sealing arrangement for joints, corners and penetrations. Product names describe applications; they do not establish separate performance grades. Compare the supplied board configuration and documents before substituting one item for another.

Deutsch: XPS-Bauplatten für Großhandel und Import aus China.

Wall, electric heating or water-pipe grooves?

AssemblyBoard route / Why it changes the choice
Tiled wall with solid backingFlat cement-coated board

Why it changes the choice: The backing surface and bonding arrangement govern the support; there is no pipe groove to select.

Tiled wall across framingFlat board with an approved thickness/fixing schedule

Why it changes the choice: Stud spacing and board-edge support must be resolved before choosing thickness.

Electric cable or mat under tilesCoated board assessed as part of the electric-heating floor build-up

Why it changes the choice: It is a substrate below the specified heating/covering layers, not a water-pipe channel panel.

Hydronic pipe channelsGrooved coated XPS board

Why it changes the choice: Pipe outside diameter, groove geometry and the complete covering layer determine the configuration.

Follow the wall-support thickness comparison or the electric heating versus water-pipe board guide for the relevant route.

Board area is not the whole wet-room materials list

Board quantities are counted by area and cut layout; joint treatment is counted by seam length, corners and penetrations. A wall with many small pieces can need more joint work than one with the same area and fewer seams. Draw the board layout before ordering the matched sealing components. The wet-area detail guide separates these quantities.

For mosaics or large tiles, check the permitted finish for the selected board assembly. Tile size, thickness and load conditions matter independently of the board’s advertised thickness.

Choose by board thickness, substrate, fixing method and the intended tile finish. In wet areas, confirm the complete waterproofing detail for joints, corners, fixings and penetrations rather than relying on the board alone.

Start with our XPS tile backer board, compare the cement-coated option, or explore bathroom backer boards. Share your application, dimensions and quantity to discuss a suitable specification.

Wholesale tile backer boards and OEM enquiries

China’s integrated supply chain connects XPS cores, reinforced facings, custom processing and export packing. Banarta brings these options together for your wholesale range. For UK and European distribution, send quantities by board size and thickness, required pack counts, label language and delivery destination. Include private-label artwork or custom dimensions in the same enquiry. Build repeat-order continuity around an approved board specification, sample and packing standard.

For a bulk or custom quotation, send your specification, quantity and destination. Ask us to confirm the minimum order, production schedule and shipping terms for your selected items. Discuss your sourcing requirements with Banarta.

Request a tile backer board quotation

Download the bulk enquiry worksheet (Excel .xlsx) to list each board size and quantity, packaging needs and required documents. Email the completed file with any drawings to Tina at Banarta.

For wholesale, distributor or project enquiries, send a board schedule with:

  • Board length, width, thickness and quantity for each size.
  • Application: wall, floor, bathroom or floor-heating assembly.
  • Facing, edge and groove requirements, with drawings where relevant.
  • Destination country or port, required delivery date and packaging or label requirements.
  • Product datasheets or test documents needed for your target market and approval process.

Minimum order quantity, price, packing, sample arrangements and delivery timing depend on the selected specification and order. Request confirmation in the quotation. Evaluate the agreed sample and documents before approving bulk supply; do not assume that a certificate for one board covers every product.

Send your tile backer board requirements to Banarta. For purchasing checks, use the sample and packaging checklist.

Still deciding which board system to specify? Read the XPS tile backer board versus cement board comparison, then use the wet-area joints, fixings and penetrations checklist to identify the sealing details that need approval before tiling.

Scroll to Top