Banarta

XPS Aluminum Radiant Panel
XPS underfloor heating panel for radiant floor heating projects
Underfloor Heating Panel
Underfloor Heating Panel
Underfloor Heating Panel
Grooved XPS Foam Backer Board for Underfloor Heating
Underfloor Heating Panel

XPS Floor Heating Panels

XPS Aluminum Radiant Panel

Grooved XPS aluminum radiant panel for hydronic heating circuits. Published size: 1200 × 600 mm with 25–50 mm thickness options. Confirm pipe paths, facing details and required floor support and covering layers.

Category:

Grooved XPS Panel with Aluminum Facing

The XPS aluminum radiant panel combines a grooved insulation board with an aluminum sheet surface for hydronic underfloor heating. Match the groove pattern to the pipe circuit and specify the facing configuration with the board.

The published panel size is 1200 × 600 mm, with a 25–50 mm thickness range. Pipe sizes and custom routing requirements can be reviewed against your project drawing.

Published Specifications

Features
Specifications
Panel Dimension
1200mm*600mm (Or custom-made according to client’s requirements)
Thickness
25mm-50mm available
 Aluminum  Thickness
Customized according to request if needed
Applied Pipe Diameter 
Φ16mm (or custom-made size.10mm and 20mm are acceptable)
Thermal conductive
About 0.028 W / M.K
Based board (XPS) Color
 Blue / Yellow / White
Compressive Strength
≥300kpa
Fire Rating
B1,B2,B3
Working Temperature 
-30℃-80℃

Confirm the current datasheet, service-temperature range and relevant fire-classification standard for the selected grade. Request test documentation for the performance requirements of your project.

Floor Assembly Checks

Check the substrate and final floor finish before deciding on the panel configuration. Direct installation of timber or tiles is not a universal feature of a grooved XPS panel; required support, preparation and covering layers depend on the selected floor system.

  • Match pipe diameter and circuit spacing to the grooves.
  • Confirm substrate flatness and support requirements.
  • Specify any bonding or load-distribution layers required by the finish.
  • Calculate finished height from the complete assembly.

Project Inquiry

Provide panel dimensions, thickness, aluminum facing requirements, pipe layout and quantity. Include the delivery destination and required documentation so that the proposed product configuration can be checked.

Installation Video

View the aluminum-faced grooved XPS panel installation video. Use the installation instructions for the exact panel and floor system supplied.

You may also like…

Scroll to Top