BANARTA
Grooved XPS Panel with an Aluminum Sheet Facing
This floor heating panel combines a grooved XPS insulation board with an aluminum sheet facing for hydronic underfloor heating. The pipe path and groove size can be specified for the planned heating circuit.
The published standard panel size is 1200 × 600 mm, with thickness options from 25 to 50 mm. The table lists 16 mm pipe compatibility and custom-size options; confirm the groove configuration and aluminum thickness for the product supplied.
Published Specifications
| Features | Specifications |
|---|---|
| Panel Dimension | 1200mm*600mm (Or custom-made according to client’s requirements) |
| Thickness | 25mm-50mm available |
| Aluminum Thickness | Customized according to request if needed |
| Applied Pipe Diameter | Φ16mm (or custom-made size.10mm and 20mm are acceptable) |
| Thermal conductive | About 0.028 W / M.K |
| Based board (XPS) Color | Blue / Yellow / White |
| Compressive Strength | ≥300kpa |
| Fire Rating | B1,B2,B3 |
| Working Temperature | -30℃-80℃ |
Request the current datasheet and applicable test reports for the selected configuration. Confirm service-temperature limits and the relevant fire-classification standard before specifying the panel.
Coordinate the Complete Floor Assembly
The panel is intended for a water-based floor heating layout, but the suitability of the finished floor depends on the full assembly. Do not assume that timber flooring or tiles can be installed directly over every configuration without additional support, preparation or covering layers.
- Check the pipe outside diameter, circuit spacing and routing drawing.
- Confirm substrate flatness and support requirements with the selected system instructions.
- Specify the final floor finish and any required load-distribution or bonding layers.
- Allow for the panel and all other layers when calculating finished floor height.
Match the Facing and Groove Details Before Ordering
For this 1200 × 600 mm aluminum-sheet-faced panel, include both the facing thickness and the pipe-routing drawing in the quotation request. Review a sample against the proposed pipe and groove profile. Keep board thickness, facing specification and drawing revision on the approved order, with board counts and packing requirements.
See the 1200 × 600 mm aluminum-faced panel buying details. Use the aluminum-facing and routing purchase guide to prepare comparable supplier quotations.
Request an aluminum-sheet-faced panel quote. Browse the XPS floor heating panel range for other listed formats.
Video and Alternative Panel Construction
Watch the aluminum-faced grooved XPS panel video.
For a studded EPS construction, compare the BWE-20 series EPS floor heating panels. Check each model against the specified floor system rather than assuming the two constructions are interchangeable.