BANARTA
Grooved XPS Board for Heating Pipe Layouts
This floor heating board combines a grooved XPS insulation core with an aluminum sheet facing. The grooves provide a defined route for pipes in a hydronic underfloor heating assembly.
The published panel size is 1500 × 600 mm, with thickness options from 25 to 50 mm. Discuss pipe diameter, groove path and aluminum thickness together when specifying a configuration.
Published Specifications
| Features | Specifications |
|---|---|
| Panel Dimension | 1500mm*600mm (Or custom-made according to client’s requirements) |
| Thickness | 25mm-50mm available |
| Aluminum Thickness | Customized according to request if needed |
| Applied Pipe Diameter | Φ16mm (or custom-made size.10mm and 20mm are acceptable) |
| Thermal conductive | About 0.028 W / M.K |
| Based board (XPS) Color | Blue / Yellow / White |
| Compressive Strength | ≥300kpa |
| Fire Rating | B1,B2,B3 |
| Working Temperature | -30℃-80℃ |
Confirm the current datasheet and applicable test reports for the supplied grade. The listed fire-rating options and temperature limits need to be checked against the project specification.
From Pipe Layout to Finished Floor
Provide the pipe outside diameter and circuit drawing so that the groove configuration can be reviewed. Match the board to the complete floor assembly, including the supporting substrate and final floor finish.
- Check the required substrate preparation and flatness.
- Confirm any load-distribution or covering layer before installing tiles or timber flooring.
- Coordinate panel thickness with the available finished-floor height.
- Use the installation instructions for the selected heating system and finish materials.
The panel should not be treated as a guarantee that leveling, additional support or bonding layers can be omitted. Heating performance depends on the complete design and operating conditions.
Order Boards by Groove Drawing
Send a dated circuit drawing for the 1500 × 600 mm board format, marking straight runs, returns and any separately routed pieces. State quantities by drawing reference and board thickness. The listed 16 mm option and custom 10/20 mm requests require their own matching groove confirmation; one groove should not be assumed to fit all sizes.
See the 1500 × 600 mm quantity and ordering details. Use the aluminum-facing and routing purchase guide to prepare comparable supplier quotations.
Request a grooved-board trade quotation. Browse the XPS floor heating panel range for other listed formats.
Video and Alternative Panel Type
Watch the aluminum-faced grooved XPS board video.
For a studded EPS panel construction, compare the BWE-20 series and check compatibility with the intended floor system.