BANARTA
XPS sandwich panels with selectable facing materials
Specify an XPS foam core with PVC, FRP, aluminum, ACP, SPC, HPL or plywood facings for your panel project. Banarta supplies this range for fabricators, distributors and project buyers discussing dimensions, surfaces and assembly requirements.
Choose the facing and construction
- PVC: discuss the skin specification and finish for wall, door or partition enquiries.
- FRP: specify surface finish and service conditions for vehicle-body or insulated-panel fabrication.
- Aluminum: define sheet thickness, finish and assembly details where a metal facing is required.
- ACP, SPC, HPL or plywood: provide the project surface specification and fabrication requirements.
Confirm the facing on each side, core grade and overall panel thickness together. A facing material name alone does not establish fire, acoustic, weathering or structural performance.
Published range specifications
| Features | Specifications |
|---|---|
| Length | 1200mm-4000mm or Customized |
| Width | 600mm / 1200mm |
| Thickness | 15mm/ 20mm/ 30mm/ 40mm Or Customized |
| Compressive Strength of XPS | 150KPa-1000Kpa Customized |
| Dimensional stability70℃±2℃,48h | 1-2% |
| Color of XPS Foam Board | Yellow/ Blue/ White/ Pink |
| Facing Materials | HPL / PVC / FRP / ACP/ SPC/ Plywood / Aluminum Sheets…. |
These are range options. Request a current datasheet for the proposed panel construction, including applicable test reports. The listed compressive strength refers to the XPS core, not an allowable load for a complete wall, roof or vehicle body.
Prepare your enquiry
- Intended use and operating or exposure conditions.
- Panel dimensions, quantities, skin thickness and finish.
- Drawings showing supports, joints, edge treatment, fixings and cut-outs.
- Required fire, thermal, mechanical or moisture performance documentation.
- Packaging requirements and delivery destination.
For cold-room, bathroom, partition or other insulated assemblies, confirm joint sealing and installation details for the complete system. Do not assume that every facing combination is suitable for every application.
Request a quotation for your selected XPS sandwich panel. Identify faces A and B, the drawing revision and quantity for each panel type. Use the custom panel drawing checklist to agree the sample reference, measurement points and acceptance checks before bulk supply.
Explore related options
Browse the XPS core sandwich panel range, or discuss the PVC-faced XPS panel for a skin-specific requirement. Foil-faced XPS insulation board is another construction to compare against your specification.