BANARTA
FRP facing with an XPS insulation core
This sandwich-panel option combines an XPS foam core with an FRP facing. Discuss the facing thickness, finish and panel dimensions for vehicle-body, partition or insulated-panel fabrication.
Define the complete panel construction when requesting a quotation. Surface requirements, edges, joints and fixings should be considered alongside the core specification; an FRP-faced panel is not automatically a tile-backer or a complete waterproofing system.
Published sandwich-panel range
The original table below covers several facing options. For this FRP-faced version, request a configuration-specific datasheet confirming the facing, core and finished panel dimensions.
| Features | Specifications |
| Length | 1200mm-4000mm or Customized |
| Width | 600mm /1200mm |
| Thickness | 15mm/20mm/30mm/40mm Or Customized |
| Compressive Strength of XPS | 150KPa-1000Kpa Customized |
| Dimensional stability70℃±2℃,48h | 1-2% |
| Color of XPS Foam Board | Yellow/Blue/White/Pink |
| Facing Materials | HPL / PVC / FRP / ACP/ SPC/ Plywood / Aluminum Sheets…. |
The listed compressive strength is for the XPS core. Confirm the required finished-panel performance and supporting reports separately; the table does not establish a wall, roof or vehicle-body load rating.
Details to confirm before ordering
- FRP surface: facing thickness, colour, finish and any cleaning or exposure requirements.
- Panel size: overall thickness, length, width, tolerances and any cut-outs.
- Assembly: edges, joints, adhesive or fixing requirements and supporting structure.
- Project documentation: applicable fire, thermal and mechanical requirements, plus quantity and delivery destination.
Application enquiries
For refrigerated bodies, cold-room partitions or other insulated assemblies, send the operating conditions and drawings for review. Suitability, surface compatibility and installation details must be confirmed for the selected construction rather than assumed from the core material alone.
Request FRP-faced panels for trade supply
For panel fabricators and project buyers, the quotation should identify both FRP skins, the XPS core and the finished panel. Define any difference between the two faces instead of relying on a generic sandwich-panel name.
- Panel schedule: drawing revision, length, width, total thickness, tolerances and quantity for each cut size.
- FRP skins: material specification, thickness, colour and surface finish on each face; include any cleaning or exposure requirements.
- Fabrication scope: edge treatment, openings, joints and any required local reinforcement, to be reviewed against the drawing.
- Acceptance requirements: state whether documents are required for the skin, core, bond or complete panel; one material test does not establish every finished-panel property.
- Delivery: destination, target date, handling, packing and surface-protection requirements.
Ask Banarta to confirm the proposed construction, fabrication scope, sample arrangements, minimum order quantity and lead time before bulk ordering.
Request an FRP-faced XPS sandwich panel quotation with your drawings and order schedule. Use the FRP panel supplier checklist to define sample and document checks.
Compare the specified facing
View the XPS core sandwich panel range for other facing options. If your specification calls for PVC skins, see the PVC-faced XPS sandwich panel; confirm material and assembly requirements for that construction.