BANARTA
Aluminum-Faced Grooved XPS Panel
This panel combines an XPS insulation core with an aluminum facing and pre-routed channels for hydronic underfloor heating pipes. Confirm the panel format, pipe fit and route layout against your heating design before ordering.
Published Specifications
The table below lists the existing product options. Request current model-specific technical data, including the test conditions and applicable fire classification, before final approval.
Features | Specifications |
Panel Dimension | 1200mm*600mm (Or custom-made according to client’s requirements) |
Thickness | 25mm-50mm available |
Aluminum Thickness | Customized according to request if needed |
Applied Pipe Diameter | Φ16mm (or custom-made size.10mm and 20mm are acceptable) |
Thermal conductive | About 0.028 W / M.K |
Based board (XPS) Color | Blue / Yellow / White |
Compressive Strength | ≥300kpa |
Fire Rating | B1,B2,B3 |
Working Temperature | -30℃-80℃ |
Plan the Floor Assembly
- Match the groove profile and spacing to the specified pipe dimensions and circuit layout.
- Confirm the aluminum facing, panel thickness and total available floor height.
- Check the supporting substrate and the covering layers required by the selected floor finish and heating system.
- Provide dimensions, quantities, packaging requirements and destination for quotation.
Do not assume tiles or timber can be laid directly over every panel configuration. Confirm the full floor build-up and installation instructions for the chosen system.
Product Demonstration
Watch the underfloor heating panel demonstration.
Compare Related Components
Explore the XPS floor heating panel range, compare EPS underfloor heating panels, or review foil tape options for the specified installation.
