BANARTA
BEA-20 EPS Panel for Hydronic Underfloor Heating
The BEA-20 is an expanded polystyrene (EPS) underfloor heating panel with a HIPS surface film and a raised mushroom-stud layout. The shaped surface provides a route for heating pipes, while interlocking edges connect adjacent panels during installation.
This model is listed with a 20 mm insulation layer and a total panel thickness of 44 mm. These are different dimensions: the model designation does not specify a compatible pipe diameter. Confirm pipe fit and the required spacing before selecting panels for your circuit layout.
Published BEA-20 Specifications
Description | BEA-20 |
Thermal Conductivity at 10℃ | 0.028W/(m.k) |
Heat Resistance | 0.8(m2.k)W |
Total Thickness | 44mm |
Compressive Strength | About 250KPA |
Size(L*W)in mm | 1370mm*720mm |
Thickness of Insulation Layer | 20mm |
Weight/M2 | 900g |
Standard Package | 11.2M2 |
Request the current product datasheet and applicable test information when checking thermal performance and load requirements. Confirm the supplied configuration and packaging before ordering.
Plan the Complete Floor Build-Up
- Check the pipe outside diameter, routing pattern and circuit design against the panel geometry.
- Allow for the insulation layer, raised studs and the specified covering layer when calculating finished floor height.
- Confirm substrate preparation, perimeter details and compatibility with the specified screed or other floor assembly.
- Include panel quantities, layout drawings and delivery requirements in your inquiry.
The panel is one component of the heating floor assembly. Installation and covering requirements should follow the selected system design; the panel dimensions alone do not establish the performance of the finished floor.
Installation and Related Panels
View the EPS underfloor heating panel installation video as a product overview, and request instructions for the configuration supplied.
For an alternative grooved board construction, compare our XPS underfloor heating panel.