Banarta

Radiant Floorheating Insulation Panel Apply to φ25mm Pipe
BE-25 EPS Radiant Floor Heating Insulation Panel - Image 2
BE-25 EPS Radiant Floor Heating Insulation Panel - Image 3
BE-25 EPS Radiant Floor Heating Insulation Panel - Image 4

EPS Floor Heating Panels

BE-25 EPS Radiant Floor Heating Insulation Panel

BE-25 studded EPS radiant floor heating insulation panel with HIPS film and interlocking edges. Listed size: 1330 × 750 mm; total thickness: 48 mm; insulation layer: 20 mm. Confirm compatible pipe dimensions and floor assembly before ordering.

Category:

BE-25 EPS Insulation Panel for Heating Pipe Layouts

The BE-25 is a studded expanded polystyrene panel with a HIPS surface film for hydronic underfloor heating. Its mushroom-shaped surface provides routes for heating pipes, and the four-sided interlocking edges join adjacent panels.

This model has a published overall size of 1330 × 750 mm and a total thickness of 48 mm. The insulation layer is listed separately at 20 mm. Check these dimensions against the available floor height and the covering layer specified for your project.

Published BE-25 Specifications

Description
BE-25
Thermal Conductivity at 10℃
0.029W/(m.k)
Heat Resistance
0.8(m2.k)W
Total Thickness
48mm
Compressive Strength
About 250KPA
Size(L*W)in mm
1330mm*750mm
Thickness of Insulation Layer
20mm
Weight/M2
1100g
Standard Package
10M2

Confirm the current product datasheet, applicable test conditions and supplied configuration before using the listed performance values in a project specification.

Selecting the Panel for Your Floor

Panel model, pipe diameter and insulation thickness are separate selection details. Provide your pipe outside diameter and circuit spacing so that compatibility with the stud geometry can be confirmed; do not infer these details from the BE-25 model reference alone.

  • Check overall panel dimensions, usable coverage and edge connections when preparing the quantity schedule.
  • Allow for the full panel height and the specified floor covering assembly.
  • Confirm substrate preparation, perimeter detailing and installation instructions for the selected heating system.
  • Include the required area, pipe specification and delivery destination when requesting a quotation.

Installation and Other Model Options

View the EPS underfloor heating installation video for an overview. Use the installation instructions applicable to the supplied panel and floor assembly.

For other published sizes and thicknesses, compare the BEA-20 panel and BSA-16 panel.

Scroll to Top