BANARTA
BSA-16 Studded EPS Heating Panel
The BSA-16 panel combines an expanded polystyrene insulation base with a HIPS surface film. Its mushroom-shaped studs provide a layout for hydronic heating pipes, and four-sided interlocking edges connect neighboring panels.
The published panel size is 1370 × 820 mm, with a total thickness of 40 mm and a 20 mm insulation layer. Use both thickness measurements when planning the floor assembly: the insulation layer is not the full height of the studded panel.
Published Specifications
| Description | BSA-16 |
|---|---|
| Thermal Conductivity at 10℃ | 0.028W/(m.k) |
| Heat Resistance | 0.8(m2.k)W |
| Total Thickness | 40mm |
| Compressive Strength | About 250KPA |
| Size(L*W)in mm | 1370mm*820mm |
| Thickness of Insulation Layer | 20mm |
| Weight/M2 | 1050g |
| Standard Package | 11.2M2 |
BSA-16 Procurement and Model Identification
Use the full BSA-16 reference on the enquiry, sample and package labels. Match the published 40 mm total height and 20 mm insulation layer to the planned floor build-up, then confirm pipe fit and usable coverage. Ask the quote to state board count and pieces per pack rather than relying on package area alone.
Compare the BS-16 panel with a 39 mm total height if reviewing similar names. Confirm the exact geometry before accepting a substitution.
Request a BSA-16 supply quotation. Use the underfloor heating purchase checklist for a combined materials enquiry, and compare the EPS floor heating panel range for other specified configurations.
Confirm current dimensions, pipe compatibility and test documentation for the supplied configuration before specifying this panel. The model name alone should not be used to select a pipe diameter.
Ordering and Layout Checks
- Provide the heating pipe outside diameter and planned circuit spacing so that the stud layout can be checked.
- Check usable coverage and edge connections when calculating the quantity for each room.
- Confirm the substrate, covering layer and finished floor height with your system designer or installer.
- Request the applicable product datasheet when assessing thermal and load requirements.
For a quotation, include the BSA-16 model reference, required area, pipe specification and delivery destination. Confirm the floor assembly rather than relying on the panel alone to determine finished-floor performance.
Installation Overview
Watch the EPS underfloor heating panel installation video. Request installation instructions for the exact panel and floor system supplied.
Compare dimensions with the BEA-20 EPS underfloor heating panel when reviewing other studded panel options.