BANARTA
BS-16 Studded EPS Heating Panel
The BS-16 panel combines an expanded polystyrene insulation base with a HIPS surface film and mushroom-shaped studs. It provides a panel layout for hydronic heating pipes, with interlocking edges joining adjacent boards.
The published dimensions are 1370 × 820 mm with a 39 mm total thickness. The insulation layer is listed at 20 mm; this is not the full height of the raised panel profile.
Published BS-16 Specifications
| Description | BS-16 |
|---|---|
| Thermal Conductivity at 10℃ | 0.028W/(m.k) |
| Heat Resistance | 0.8(m2.k)W |
| Total Thickness | 39mm |
| Compressive Strength | About 250KPA |
| Size(L*W)in mm | 1370mm*820mm |
| Thickness of Insulation Layer | 20mm |
| Weight/M2 | 1050g |
| Standard Package | 11.2M2 |
BS-16 Orders with a Confirmed Panel Height
Identify BS-16 and its published 39 mm total height on the order and sample schedule. Send the pipe outside diameter and layout for confirmation: the product table does not declare a pipe size. State required floor coverage, board quantities, pack labels and destination, and confirm usable area per board.
For another panel at the same published 1370 × 820 mm footprint, compare the 44 mm BS-20 panel. Keep each height as a separate order line.
Request a BS-16 EPS panel quotation. Use the underfloor heating purchase checklist for a combined materials enquiry, and compare the EPS floor heating panel range for other specified configurations.
Request the current product datasheet and relevant test conditions before using the listed thermal or load values in a project specification.
Distinguish BS-16 from Other Models
BS-16 and BSA-16 have similar model names and the same published footprint, but their listed total thicknesses differ: 39 mm for BS-16 and 40 mm for BSA-16. Confirm the exact model, pipe fit and panel geometry when ordering rather than assuming interchangeability.
Project Information to Confirm
- Heating pipe outside diameter and circuit spacing.
- Required floor area and usable panel coverage.
- Substrate preparation, perimeter details and specified covering layer.
- Available finished-floor height, including the full panel profile and covering assembly.
Include the BS-16 reference, project quantity and delivery destination in your inquiry. Installation requirements should follow the selected floor system, not the panel thickness alone.
Installation Overview
View the EPS underfloor heating panel installation video and request instructions for the supplied configuration.