BANARTA
BS-20 Studded EPS Panel
The BS-20 is an EPS insulation panel with a HIPS surface film and mushroom-shaped studs for hydronic floor heating pipe layouts. Interlocking edges connect the panels across the installation area.
The published dimensions are 1370 × 820 mm, with a 44 mm total thickness and a 20 mm insulation layer. The total height includes the raised profile; allow for the specified covering layer separately when planning the finished floor level.
Published BS-20 Specifications
| Description | BS-20 |
|---|---|
| Thermal Conductivity at 10℃ | 0.028W/(m.k) |
| Heat Resistance | 0.8(m2.k)W |
| Total Thickness | 44mm |
| Compressive Strength | About 250KPA |
| Size(L*W)in mm | 1370mm*820mm |
| Thickness of Insulation Layer | 20mm |
| Weight/M2 | 1050g |
| Standard Package | 11.2M2 |
BS-20 Panel Orders for Heating Suppliers
List BS-20 separately in your purchase schedule with the published 44 mm total height and 20 mm insulation layer. Confirm the usable coverage and actual pieces per pack before converting the required floor area into an order. Add the pipe outside diameter, circuit layout, sample-fit request and packing labels for review.
For a graphite EPS construction at the same published footprint, compare the BS-20M graphite panel. Confirm the supplied material and model-specific data when comparing offers.
Request a BS-20 panel quotation. Use the underfloor heating purchase checklist for a combined materials enquiry, and compare the EPS floor heating panel range for other specified configurations.
Confirm the current datasheet and test conditions for the supplied product before specifying thermal performance or load requirements.
Match the Panel to the Heating Layout
Provide your pipe outside diameter and planned spacing for a compatibility check. The BS-20 reference identifies the model and should not replace confirmation of the pipe fit, stud layout or installation requirements.
- Check usable coverage and edge connections before calculating order quantities.
- Confirm the substrate, perimeter details and covering layer required by the floor design.
- Include the complete panel height when coordinating thresholds and finished floor levels.
- State the required area, model reference and delivery destination when requesting a quotation.
Compare Panel Heights
The BSA-16 panel is also listed at 1370 × 820 mm but has a published total thickness of 40 mm. Compare the complete specifications and pipe compatibility of each model rather than treating panels with the same overall footprint as interchangeable.
Installation Overview
View the EPS underfloor heating panel installation video. Request instructions for the exact panel and floor assembly supplied.