Banarta

EPS Radiant Floorheating Panel Apply to φ16mm Pipe
Rigid EPS Radiant Floorheating Panel Apply to φ16mm Pipe | XPS Insulation Panel - Premium Quality
Rigid EPS Radiant Floorheating Panel Apply to φ16mm Pipe | XPS Insulation Panel - Premium Quality
Rigid EPS Radiant Floorheating Panel Apply to φ16mm Pipe | XPS Insulation Panel - Premium Quality
Rigid EPS Radiant Floorheating Panel Apply to φ16mm Pipe | XPS Insulation Panel - Premium Quality

EPS Floor Heating Panels

BS-16 EPS Radiant Floor Heating Panel

BS-16 EPS radiant floor heating panel with HIPS film and interlocking edges. Published size: 1370 × 820 mm; total thickness: 39 mm; insulation layer: 20 mm. Confirm the exact model and pipe compatibility before ordering.

Category:

BS-16 Studded EPS Heating Panel

The BS-16 panel combines an expanded polystyrene insulation base with a HIPS surface film and mushroom-shaped studs. It provides a panel layout for hydronic heating pipes, with interlocking edges joining adjacent boards.

The published dimensions are 1370 × 820 mm with a 39 mm total thickness. The insulation layer is listed at 20 mm; this is not the full height of the raised panel profile.

Published BS-16 Specifications

Description
BS-16
Thermal Conductivity at 10℃
0.028W/(m.k)
Heat Resistance
0.8(m2.k)W
Total Thickness
39mm
Compressive Strength
About 250KPA
Size(L*W)in mm
1370mm*820mm
Thickness of Insulation Layer
20mm
Weight/M2
1050g
Standard Package
11.2M2

Request the current product datasheet and relevant test conditions before using the listed thermal or load values in a project specification.

Distinguish BS-16 from Other Models

BS-16 and BSA-16 have similar model names and the same published footprint, but their listed total thicknesses differ: 39 mm for BS-16 and 40 mm for BSA-16. Confirm the exact model, pipe fit and panel geometry when ordering rather than assuming interchangeability.

Project Information to Confirm

  • Heating pipe outside diameter and circuit spacing.
  • Required floor area and usable panel coverage.
  • Substrate preparation, perimeter details and specified covering layer.
  • Available finished-floor height, including the full panel profile and covering assembly.

Include the BS-16 reference, project quantity and delivery destination in your inquiry. Installation requirements should follow the selected floor system, not the panel thickness alone.

Installation Overview

View the EPS underfloor heating panel installation video and request instructions for the supplied configuration.

Scroll to Top