Banarta

Double Layers EPS Floorheating Panel Apply φ20mm Pipe
BWE-20 Series Double-Layer EPS Floor Heating Panels - Image 2
BWE-20 Series Double-Layer EPS Floor Heating Panels - Image 3
BWE-20 Series Double-Layer EPS Floor Heating Panels - Image 4
BWE-20 Series Double-Layer EPS Floor Heating Panels - Image 5
BWE-20 Series Double-Layer EPS Floor Heating Panels - Image 6

EPS Floor Heating Panels

BWE-20 Series Double-Layer EPS Floor Heating Panels

BWE-20 and BWE-20A double-layer EPS heating panels with shaped plastic surfaces. Compare 43 mm and 33 mm total heights, with 20 mm and 10 mm insulation layers. Pipe specifications differ by model; confirm the required configuration.

Category:

BWE-20 and BWE-20A Double-Layer Panels

This EPS floor heating panel series combines a shaped plastic upper layer with an expanded polystyrene insulation base. The studded surface provides a layout for hydronic heating pipes.

BWE-20 and BWE-20A share a published overall size of 1350 × 820 mm but have different panel heights and insulation layers. Specify the model suffix when requesting a quotation or checking pipe compatibility.

Compare the Two Configurations

  • BWE-20: listed with a 43 mm total thickness and a 20 mm insulation layer.
  • BWE-20A: listed with a 33 mm total thickness and a 10 mm insulation layer.

The published pipe-diameter entries also differ between the two models. Confirm the current configuration against your pipe outside diameter and circuit spacing rather than applying one pipe size to the entire series.

Published Specifications

Description
BWE-20
BWE-20A
Thermal Conductivity at 10℃
0.029W/(m.k)
0.031W/(m.k)
Heat Resistance
0.8(m2.k)W
0.8(m2.k)W
Compressive Strength
About 250KPA
About 250KPA
Applied Pipe Diameter
φ20mm
φ10mm
Total Thickness
43mm
33mm
Size(L*W)in mm
1350mm*820mm
1350mm*820mm
Thickness of Insulation Layer
20mm
10mm
Weight/M2
1250g
1150g
Standard Package
11.07M2
13.28M2

Request the current product datasheet and relevant test conditions before specifying thermal or load performance. Confirm pipe fit and installation details for the exact panel supplied.

Floor Design and Ordering

Allow for the complete raised panel profile and the specified covering layer when coordinating finished floor levels. Substrate preparation, perimeter details and screed compatibility should follow the selected heating floor design.

Include the model, required area, pipe specification and delivery destination in your inquiry. Check usable coverage and package quantities before placing an order.

Installation Overview

View the EPS underfloor heating panel installation video for an overview, and request instructions for the supplied model.

For a different published panel footprint, compare the BWE-16 series. Similar names do not establish interchangeability.

Scroll to Top