BANARTA
Introduction:
Graphite EPS Floorheating Board is made of Graphite expanded polystyrene. Compare the published thermal properties for the selected model.
Its special design ensures that heating pipe completely encased in concrete. Pipe raise up design increases the area between heating pipe and concrete,enhence efficiency of heating transfering.
Four side edge interlock design makes installation very easy, no need any staples，free cutting, saving labor cost and time a lot.
Specifications:
Description | BSM-16 | BSM-16A | BSM-16B |
Thermal Conductivity at 10℃ | 0.032W/(m.k) | 0.030W/(m.k) | 0.028W/(m.k) |
Heat Resistance | 0.8(m2.k)W | 1.1(m2.k)W | 1.35(m2.k)W |
Compressive Strength | About 250KPA | About 250KPA | About 250KPA |
Applied Pipe Diameter | φ10mm | φ10mm | φ10mm |
Total Thickness | 33mm | 35mm | 38mm |
Size(L*W)in mm | 600mm*600mm | 600mm*600mm | 600mm*600mm |
Thickness of Insulation Layer | 15mm | 17mm | 20mm |
Weight/M2 | 800g | 850g | 900g |
Standard Package | 8.3M2 | 8.3M2 | 8.3M2 |
Advantages :
1. Saving the pipeline laying time 50% at most.
2. Improve the working efficiency，only one labor can finish the work.
3. Strong enough for people standing on .
4. Embedded pipeline design, protect the pipeline from damage
5. No need staples during installation, avoid damage of the insulation layer.
6. Uniform pipeline laying, keep the same distance between pipes.
Graphite EPS Floorheating Board is a kind of floor heat distribution panel in hydronic underfloor heating system. It is cost-effectively and bring a lot of conveniences . We have many different models available, welcome to contact us for more details.
How to install EPS underfloor heating panel
Hot Sales Products Recommended:
XPS Radiant Floorheating Board Aluminum XPS Radiant Panel XPS Foam Composite Panels
Before ordering: Confirm the required pipe diameter and groove fit for the selected BSM-16 series model with our team. Do not infer pipe compatibility from the model number alone.